How To Flashing Firmware/Stock Rom(MTK) using Smart Phone Flash Tool(sp tool)


These Are The Insructions to Flashing Any Stock Rom And Custom Rom Smart Phone Flash Tool Or Any MTK Chipset(SP Flash Tool)Windows MAC(pc).

Requirement:Your Smartphone Should Have at Lesat 30-40 Percent Charge Of Battery and usb data cabel Then perforem The flashing process.



Flash Firmware Using Smart Phone Flash Tool (SP Flash Tool)


1: Download usb driver And Install USB Driver In (Pc).Already Installed usb driver onyou pc then skip driver Installed.

2: Power Of Samrtphone remove battery then insert battery(Don’t removable battery it only Power Of then vol down connect usb cable.


3: Download Phone Model Firmware/Stock rom or custom rom .Downlaod Winzip Winrar Win7zip extract it your pc.

4: Downlad and Extract (Sp flash Tool) Following File:

5: Open flash_tool.exe

6: Sp Flash tool is launched.Click on the download Tab

7:Download Tab,now click on the scatter-loading button.

8: Now,Locate the Scatter File(you will find the scatter file in the firmware folder)

9: Click the download button to begain the flashing process.

10: Now connect your smartphone to the pc using USB cable,without battery if it removable.after connecting the device to the PC vol up or vol down key,then your pc easily detect you smartphone.

11: Flashing is done,disconnect your smartphone from the PC.

12: See Video Tutorial